Instructions for use


Start by unscrewing the turntable with the tool (1).Measure out where the hole should be using markings located on the underside of the turntable(2).Drill holes with the steel drill in the turntable with M6 drill. Place the bat under the turntable and mark where the holes should be. Drill holes in the bat just in time for the screw head(4).

The bats are made of wood which is an organic material. They should therefore be handled accordingly. Tips can be a let them dry vertically on grill type dish racks. They feel good from being impregnated with Beeswax oil after a while. You may also need to sand the edges with sandpaper

20% beewax is melted in a water bath and mixed with 80% rapeseed oil.

%d bloggare gillar detta: